


Deembedding, often a necessary and complex task, is made easier with an integrated hardware and software solution. Whether you are debugging a high-speed interface such as DDR or PCIe, characterising a fast clock or analysing a complex RF signal, you want to see the real signal and not artifacts of the test setup such...
Published: Sep 03, 2020



The more successful a gate driver is in reducing power-up and power-down times, the bigger the headache for accurate measurements. Both choosing the right probe and optimizing the probing technique are significant factors in improving measurement accuracy.
This whitepaper provides guidelines.
Published: Jun 04, 2020



The shift from a physical to digital world has been enabled by the IoT with a promise to bring a better, smarter world to consumers.
A renewed focus has been placed on security, flexibility and managing costs associated with the IoT gateway. More and more organizations are turning to Linux embedded operating systems...
Published: Aug 02, 2018



Flash memory is commonly used to store firmware in embedded systems. Occasionally, the firmware stored in the Flash memory in some systems is accidentally corrupted, preventing the system from booting up after power-on. Flash corruption is commonly associated with a software bug. However, it is also commonly understood...
Published: Jul 19, 2018



This paper describes a method for reducing the power consumption of sensor systems by utilizing the standby functions of a microcontroller (MCU). In concrete terms, the frequency of sensor measurements is reduced, and the system is kept in the standby condition for as long as possible. Furthermore, abnormality detection...
Published: Jul 16, 2018



One of the primary purposes of a gate driver is to enable power switches to turn on and off faster, improving rise and fall times. Faster switching enables higher efficiency and higher power density, reducing losses in the power stage associated with high slew rates. However, as slew rates increase, so do measurement and...
Published: Sep 03, 2020



Benefit from the experts of the AURIX™ Preferred Design House and download our white paper!
Infineon's AURIX™ microcontroller family is equipped with many safety features and functionalities. Hitex, an AURIX™ Preferred Design House provides a white paper where you can learn how these powerful...
Published: Nov 25, 2020



Vector Network Analysers (VNA) are gaining popularity in the Signal Integrity community as Time Domain Measurement and Analysis tools.
VNAs with 8 ports or more can provide significant decreases in test time by migrating from a 4-port measurement system to an 8-port measurement system. For tight tolerance DUTs...
Published: Sep 01, 2020



Macro-scale energy harvesting technologies in the form of windmills, watermills and passive solar power systems have been around for centuries. Now, as designers seek to cut the cords, they turn to microenergy harvesting systems that can scavenge milliwatts from solar, vibrational, thermal and biological sources.
...
Published: Jul 23, 2018



While almost every power-supply engineer intimately knows and understands the lab setup for measuring efficiency, there are many important nuances that must be considered when measuring the efficiency of a device with ultralow quiescent current (IQ). For a device that consumes less than 1 µA, the circuit’s...
Published: Jul 23, 2018



In a design of a modern switch-mode power supplies (SMPS), the designer has to ensure that the converter is operating in its specified values over all circumstances. For example, some of these tests to ensure proper performance are output voltage deviation test, load transient test, output voltage ripple, input voltage...
Published: Sep 03, 2020



An integral part of modern RF/microwave circuit design is circuit simulation and evaluation in which scattering parameters (S-parameters) for each element of a system are utilized to predict the overall small signal performance as the elements are cascaded to form the entire system.
This paper describes...
Published: Jul 20, 2018



This article describes best practices for new designs of PROFIBUS DP nodes, and covers bus node isolation, PROFIBUS compliance, and bus signal polarity. It includes a review of a new family of PROFIBUS International recognized isolated transceivers, whose isolation technology is based on Giant Magneto Resistance (GMR)....
Published: Jul 17, 2018



This in-depth white paper guides you through the choices and weighs key design considerations to help you pick the right transceiver. It reviews the most typical RS-485 ICs and explore the most common design considerations. Then it examines electrostatic discharge (ESD) protection and compare the Human Body Model (HBM)...
Published: Jul 17, 2018